| 1. | Paper and board tests . board crushing test . static calibration of the crushing machine
纸张和纸板试验.纸板压缩试验.压缩机静态校正 |
| 2. | The static calibration of the sensor is implemented by using the least square theory
该传感器采用了高度集成式弹性体结构；应用最小二乘理论实现了传感器的静态标定。 |
| 3. | Standard practice for static calibration of electronic transducer - based pressure measurement systems for geotechnical purposes
土工用电子传感器型压力测量系统静态校准标准规程 |
| 4. | The data - collection system is developed via vb , vc and assembly language . the static calibration system is developed at one time
应用vb 、 vc 、汇编等语言开发了数据采集软件系统，并设计出了静态标定系统。 |
| 5. | This paper presents the development and preliminary application works of an automatic strain gauge balance static calibration system in ecs for 1m hypersonic wind tunnel of cardc
本文论述了cardc超高速空气动力研究所1m高超声速风洞配套的新型全自动六分量应变天平地轴系( ecs )校准系统的研制和初步应用研究工作。 |
| 6. | In our country the method of pressure - measuring with copper cylinders adopts the system of static calibration on the whole . the serious static - dynamic discrepancy will be caused when the copper cylinders statically calibrated are used to measure the dynamic chamber pressure
我国的铜柱测压法基本上仍沿用静态标定体制，而静标铜柱用于动态膛压测量会产生严重的静动差。 |
| 7. | The main research in this thesis include performance indices definition of the f / t sensors , performance analysis of the 3 - axis and 5 - axis f / t sensor , static calibration of multi - axis f / t sensor and the application of 6 - axis f / t sensor
本文的主要内容包括传感器的性能指标定义，在此基础上的三、五维力传感器的性能分析，多维力传感器的静态标定研究，六维力传感器的应用研究。 |
| 8. | Several types of 6 - axis f / t sensor prototypes and signal processing system are developed with considering all the factors , including force isotropy , sensitivity , physical size and so on . the static calibration system is developed also
在综合考虑传感器的力各向同性、灵敏度特性及传感器外型尺寸等多方面因素的情况下，研制了数种六维力传感器样机及信号处理系统，并设计了静态标定系统。 |
| 9. | In the end , the methods of the static calibration and the rule of transforming forces to movement velocities are studied . the thesis helps to develop virtual body control system test the sensor ' s control functions . the 6 - axis f / t sensor is also proved to be successful in the micromanipulator robot system
本文的最后部分研究了多维力传感器的静态标定方法，建立了从六维信号到被控对象的运动控制之间的对应关系，开发了检验六维力传感器控制功能的虚拟样机控制系统，并将六维力传感器用于微操作机器人控制系统中。 |
| 10. | The main research in this thesis includes performance indices definition of the stewart platform based 6 - axis f / t sensor , influence on sensor ' s static indices of coordinate system , prototype design of the 6 - axis f / t sensors , static calibration and so on . based on this research , the force - drive mode 6 - dof mouse is developed
本文的主要研究内容包括stewart平台六维力传感器的性能指标定义、坐标系变化对传感器静态特性的影响、六维力传感器的样机设计、传感器的静态标定研究等，并在此基础上开发了力驱动方式的六维鼠标。 |
